The soil quality for the installation of outdoor fitness equipment should be within 800mm from the surface, and the fastening factor should be a non-porous and non-sand loam geological structure of Class II or above with a fastening factor of not less than 0.7, otherwise it cannot be installed; 

2.The horizontal distance between outdoor fitness equipment and the edge of underground pipes and underground lines should not be less than 2 meters, and the distance from various office buildings and residential buildings should not be less than 5 meters; 

3. The horizontal distance between outdoor fitness equipment and overhead high and low voltage wires should not be less than 3 meters; 

4. The horizontal size of the concrete foundation pit of each supporting column of the outdoor fitness equipment should not be less than 400mm*400mm, and the concrete foundation should not be disposed of in the shape of the upper big and the lower small; 

5.The light source within 2 meters of the outdoor fitness equipment used at night should not be too weak; 

6. After the outdoor fitness equipment is installed, each supporting column and main body should be perpendicular to the installation ground, and the verticality tolerance should not be greater than 1/100. 

7. Outdoor fitness equipment should be kept away from inflammable, explosive, toxic and harmful items that do not meet national standards; 

8. The concrete strength of pouring outdoor fitness equipment should not be lower than C20, and before the foundation is not completely solidified, there should be a special person to supervise it; 

9. The column of outdoor fitness equipment buried underground should firmly fix the lateral support plate; 

10. Attention should be paid to the depth of the column of outdoor fitness equipment buried underground. When the height of the equipment is greater than 2000mm, it should not be less than 500mm, when it is 1000mm~2000mm, it should not be less than 400mm, and when it is less than 1000mm, it should not be less than 100mm of concrete support layer;